Silk All-In-One Mineral Paint and Products

Silk All-In-One-Mineral Paint by Dixie Belle is a true all-in-one-paint!

  • Non-Toxic, ZERO VOC's
  • Built-in TOP COAT
  • Built-in STAIN BLOCKER
  • Built-in PRIMER
  • Water Resistant
  • UV Resistant
  • Antimicrobial Mildew-Resistant
  • Washable, easy to clean
  • Low-Reflective FInish

Stays looking fresher and new longer than other paints because of proprietary additives. These special additives give your furniture a harder stronger layer. It actually penetrates into the drying surface to create a smoother and stronger coating. The propriety additives will guard your surfaces against grease stains, water, and mildew. the paint is easily scrubbable so stains that do happen can easily be removed once the paint has fully cured in 30 days.

The paint has a flat, low-reflective finish that's easy to clean, touches up well, and hides minor surface imperfections.

All surfaces should be properly prepared and cleaned, preferably with Dixie Belle Pristine Clean, rinse and allow to dry.

Silk All-In-One Mineral Paint can be used as a primer, including woods that contain tennis (two primer coats of Silk is required for extra bleeders) and heavily stained areas.

For heavy stains, test for stain bleed-through by applying Silk as a topcoat to a small section. If the stain bleeds through the topcoat, spot prime another coat to the stained area and test again before top coating. If bleeding continues, longer dry time of at least 4 hours is needed before top coating.

The perfect temperature to use Silk is between 10-32 degrees Celsius.

It is not recommended to thin Silk (maximum thinning approx 1 tbs water to 1 jar of the paint).

Apply with a dry synthetic brush

If using a sprayer and thinning is required, thin with water at a rate of no more than 1/2 pint per gallon.

Darker colours sometimes require additional dry time between coats. Cooler temperatures or higher humidity may prolong drying time.